thick film, resistor array www.vishay.com for technical questions contact: ff3aresistors@vishay.com document number: 31002 6 revision: 06-dec-05 cra06e and s vishay dale features ? convex terminal array available with either scalloped corners (e version) or square corners (s version) ? wide ohmic range: 10 r to 1 m0 ? 4 or 8 terminal package with isolated resistors ? lead (pb)-free solder contacts on ni barrier layer ? pure tin plating provides co mpatibility with lead (pb)-free and lead containing soldering processes ? compatible with "restriction of the use of hazardous substances" (rohs) directive 2002/95/ec (issue 2004) ? operating temperature range of - 55 c to + 150 c cra06e and cra06s thick film resistor arrays are constructed on a high grade ceramic body with convex terminations. a small package enables the design of high density circuits. the single component reduces board space, component counts and assembly costs. 1) rated voltage: note: products can be ordered using either the product decription or the part number standard electrical specifications model power rating p 70 c w circuit limiting element voltage max. v ? temperature coefficient ppm/k tolerance % resistance range ? e-series cra06e cra06s 0.063 03 50 100 1 10r - 1m0 24 - 96 200 2; 5 10r - 1m0 24 jumper: zero-ohm-resistor available; r 50 m ? technical specifications pa r a m e t e r u n i t cra06e & s 03 circuit rated dissipation at 70 c w 0.063 limiting element voltage 1) v ? 50 insulation voltage (1 min) v dc/ac peak 100 category temperature range c - 55 to + 150 insulation resistance ? > 10 10 p*r model termi n al style pi n v alue tolera n ce special cra06 s e 04 08 r = decimal f = 1 % g = 2 % j = 5 % z = 0 ? j u mper u p to 2 digits k = tho u sand part number and product description part number: cra06s08310k0jta cra06 s0 83 1 0k0jt a product description: cra06s 08 03 473 j rt1 e3 cra06s 08 03 473 j rt1 model termi n al cou n t circuit type resista n ce v alue tolera n ce packi n g 1) cra06s 04 0 8 03 473 = 47 k ? 4702 = 47 k ? 10r0 = 10 ? 100 = 10 ? 000 = 0 ? j u mper f = 1 % g = 2 % j = 5 % z = 0 ? j u mper rt1 rt6 cra06e packi n g ta = rt1 tc = rt6 circuit 3 = 03 first t w o digits (three for 1 %) are significant. last digit is the m u ltiplier 1) please refer to ta b le packi n g, page 8 . m = million 0000 = 0 ? j u mper e3 lead (p b )-free e3 = p u re tin termination finish 1)
document number: 31002 for technical ques tions contact: ff3ar esistors@vishay.com www.vishay.com revision: 06-dec-05 7 cra06e and s thick film, resi stor array vishay dale dimensions 103 a e a e 8 -terminal de v ice s - v ersion pin 1 a d 103 e - v ersion model pin no# dimensions [in millimeters] la a 1 bb*p t w cra06s 4 1.6 0.38 0.61 0.3 0.3 0.8 0.5 1.5 cra06e 8 3.2 0.38 - 0.3 0.3 0.8 0.5 1.5 cra06s 8 3.2 0.38 0.61 0.3 0.3 0.8 0.5 1.5 tol 0.15 0.15 0.15 0.15 0.15 0.1 0.1 0.15 solder pad dimensions [in millimeters] modelpinscwdpabe cra06s 4 0.8 3.1 0.36 0.44 1.15 cra06e cra06s 8 0.8 3.1 0.36 0.8 0.44 1.15 0.63 available types and ranges model terminal count circuit temperature coefficient tolerance cra06s 04 03 100 ppm/k 1 % 200 ppm/k 5 % ; 2 % 08 03 100 ppm/k 1 % 200 ppm/k 5 % ; 2 % cra06e 08 03 100 ppm/k 1 % 200 ppm/k 5 % ; 2 %
www.vishay.com for technical questions contact: ff3aresistors@vishay.com document number: 31002 8 revision: 06-dec-05 cra06e and s vishay dale thick film, resistor array description production is strictly controlled and follows a set of instructions established for reproducibility. a thick film layer is deposited on a high grade ce ramic substrate. the resistor elements are covered by a protective coating designed for electrical, mechanical and c limatic protection. the wrap around terminations receive a final pure tin on nickel plating. the result of the determined production is verified by an extensive testing procedure. on ly accepted products are laid directly into the paper tape in accordance with eia 4 8 1 . assembly the resistors are suitable for processing on automatic smd assembly systems. they are suitable for automatic soldering using wave and solder paste reflow. due to the design, arrays have automatic placement capability. the resistors are lead (pb)-free, the pure tin plating provides compatibility with lead (pb)-free and lead-containing soldering processes. all products comply with the cefic-eeca-eicta list of le gal restrictions on hazardous substances. this includes full compatibility with the following directives: ? 2000/53/ec end of vehicle life directive (elv) ? 2000/53/ec annex ii to end of v ehicle life directive (elv ii) ? 2002/95/ec restriction of the use of hazardous substances directive (rohs) ? 2002/96/ec waste electrical and electronic equipment directive (weee) solderability is specified for 2 years after production or re-qualification. the permitted storage time is 20 years. circuit derating 120 100 8 0 60 40 20 0 - 55 - 25 0 25 50 75 100 125 150 ambient temperature c 70 rated power % 03 circuit 4 pin 8 pin packing model tape width diameter pieces pitch packing code paper cra06 8 mm 180 mm/7" 5000 4 mm rt1 8 mm 330 mm/13" 20000 4 mm rt6
cra06e and s thick film, resistor array vishay dale document number: 31002 for technical ques tions contact: ff3ar esistors@vishay.com www.vishay.com revision: 06-dec-05 9 performance test conditions of test test results endurance test at 70 c per eia 575 1000 hour at 70 c, 1.5 hours "on", 0.5 hours "off" 1.0 % overload per eia 575 short time overload 2.5 x rated continuous working voltage for 5 seconds. not to exceed 2 x max operating voltage 0.5 % thermal shock per eia 575-3.5 0.5 % moisture resistance per eia 575-3.10 1.0 % resistance to soldering heat eia 575 10 seconds at 260 c solder bath temperature 2.0 % high temperature exposure per eia 575-3.7 1.0 % low temperature operations per eia-575-3.6 0.5 % solderability & leaching eia 575-3.12 95 % coverage
legal disclaimer notice vishay document number: 91000 www.vishay.com revision: 08-apr-05 1 notice specifications of the products displayed herein are subjec t to change without notice. vishay intertechnology, inc., or anyone on its behalf, assume s no responsibility or liability fo r any errors or inaccuracies. information contained herein is intended to provide a product description only. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. except as provided in vishay's terms and conditions of sale for such products, vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and /or use of vishay products including liab ility or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyrigh t, or other intellectual property right. the products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify vishay for any damages resulting from such improper use or sale.
|
